Conductor bar for construction hoist 16mm2

Product Enquiry

Description

16mm2 Conductor bar for construction hoist

Conductor bar for construction hoist is a replacement of the power cable. It helps save the trouble of cable damage. It is applied for high building construction. Conductor bars will be a trend in the future. For some high buildings, it is not conviniet to use cable, Because need to consider the self-weight of the cable. And when the calbe is too long, it will be easy to break if hang the object. But using conductor bars will not have this trouble

Technical Data Sheet

NOITEMPARAMETER
1RATED CURRENT80A
2RATED VOLTAGE380V
3DIMENSION3016x60x54mm
4WEIGHT6.8kg
5INSULATION RESISTANCE≥0.5MΩ
6DIELECTRIC WITHSTANDING VOLTAGEAC 3750V, NO BREAKDOWN AND FLICKERING WITHIN 1 MIN
7PROTECTION GRADE OF SHELLIP23
8Electrothermal Stability20/rated 1s
9Rated Short-time Withstand Current & Rated Peak Withstand Current4.5KA/6.75KA
10Ambient Features1、Heat Resistance Test:Normal Type +55°C

2、Low Temperature Test -30°C
3、Heat and Humidity Test: Relative Humidity 95%,+25°C
4、Air Pressure: 86-106KPa

11Flame ResistanceSelf Extinguishing
12Parameter of Power Transmission LineCompliant with National Standard GB3049 <cable conductor>Resistance ≤0.028Ωmm2/(+20°C)
13Current CollectorTraction Force:F<80N;Traveling Speed:V<100m/min
14ELECTRIC BRUSH PARAMETERResistance Coefficient:0.1-0.35;Friction Coefficient:0.2
Contact Voltage Drop:0.3-0.1V;Abrasion after operating 2000km <0.7mm
Effective Abrasion of Brush:4-6mm;Effective Working Pressure:1.8-2.3N/cm2

Installation video

Reviews

There are no reviews yet.

Be the first to review “Conductor bar for construction hoist 16mm2”

Your email address will not be published. Required fields are marked *