1. Introduction
The output shaft of the reducer gear box is the shaft connected to the drive wheels and it turns at a speed determined by the gear you have selected. In the lower gears this speed will be lower than the input shaft’s speed to allow the engine to be running at an efficient speed while the driven wheels are turning at a manageable speed. In top gear however, the output shaft will be turning at close to the input shaft’s speed.
We supply different specification output shaft for different reducer of construction hoist parts output shaft, it will match with the worm gear and worm work smoothly and safely.
2. Technical Parameters
Model | Tian ming shaft | Jing gang shaft | Jiang lu shaft | Bao da shaft | Ao ya shaft | Xiang he shaft |
Art. No. | 11960005 | 11960002 | 11960001 | 11960003 | 1120000103 | 11960006 |
Weight | 7.0 | 7.0 | 6.8 | 7.0 | 7.0 | 7.0 |
Length | 309 | 298 | 294 | 298 | 312.5 | 292 |
Length of thread steps | 19 | 18 | 16 | |||
Length of Spline steps | 41 | 40 | 53.5 | 41 | 41 | 54.5 |
Length of Large bearing steps | 30 | 34 | 33 | 30 | 34 | 34 |
Length of Large diameter steps | 60 | 55 | 44 | 60 | 58.8 | 45 |
Length of Worm gear steps | 79 | 79 | 79 | 79 | 78 | 78 |
Length of small bearing steps | 36 | 36 | 37 | 36 | 41 | 34 |
Oil seal step diameter | Φ60 | Φ60 | Φ60 | Φ60 | Φ60 | Φ60 |
Large bearing steps diameter | Φ65 | Φ65 | Φ65 | Φ65 | Φ65 | Φ65 |
Worm wheel step diameter | Φ65 | Φ65 | Φ65 | Φ65 | Φ65 | Φ65 |
Small bearing steps diameter | Φ50 | Φ50 | Φ50 | Φ50 | Φ50 | Φ50 |
Thread | M42×1.5 | M42×1.5 | M42×1.5 | |||
Spline N*d*D*B | 6×49.5×55×14 | 6×49.5×55×14 | 6×49.5×55×14 | 6×49.5×55×14 | 6×49.5×55×14 | 6×49.5×55×14 |
Keyway | 20 | 18 | 18 | 18 | 18 | 18 |
3. Size diagram
Reviews
There are no reviews yet.